Mdpe Pipe Liner - 25Mm

Mdpe Pipe Liner - 25Mm

The MDPE Blue Pipe Coil (25m x 25mm) is a high-performance, medium-density polyethylene pipe specifically designed for underground water service connections. It serves as the primary link between the distribution mains and domestic or commercial properties, providing a durable and reliable solution for transporting potable water.

Key Features and Specifications
Compliance: Fully WRAS Approved, certifying that the pipe is safe for the distribution of potable (drinking) water.

Material: Constructed from high-grade Blue MDPE, offering excellent chemical resistance, flexibility, and a high strength-to-weight ratio.

Dimensions:

Nominal Diameter: 25mm (Outer Diameter).

Length: 25 meters (25,000mm).

Performance Rating:

Working Pressure: Up to 12.5 bar, making it suitable for high-pressure water mains.

Temperature Limit: Designed for cold water systems with a maximum operating temperature of 20ºC.

System Suitability: Primarily intended for below-ground burial. For any sections installed above ground, the pipe should be housed within protective ducts to prevent UV degradation and mechanical damage.

The Installer's Advantage
The 25-meter coil is highly favored by groundworks contractors and plumbers for its balance of length and maneuverability. The 25mm size provides superior flow rates compared to standard 20mm alternatives, making it the ideal choice for larger residential properties or systems with high water demand. Its flexible nature allows for long, continuous runs with minimal fittings, significantly reducing the risk of underground leaks.

Essential Companion Products (MDPE System)
To ensure a secure and permanent installation, the following components are required:

Internal Support: To maintain the pipe's integrity at jointing points, use: MDPE Pipe Liner - 25mm

Connection Fittings: Compatible with standard 25mm MDPE compression couplers, tees, and elbows.

Transition to Internal Copper: To move from this 25mm main to 15mm copper pipework, use a: Brass Compression Female Elbow - 15mm x 1/2" (paired with a 1/2" male MDPE adaptor).

Main Pipework: Standard internal distribution: Copper Tube 15mm x 0.7mm x 3m

Specialist Support and Local Collection
Need advice on trench depth requirements or MDPE-to-Copper transitions? Our trade counter is fully stocked with MDPE coils and all associated fittings for immediate collection.

Visit our trade counter and Bathroom Showroom at 61 Fullers Road, E18 2QB for expert advice and quick access to parts.