Butterfly Handle Ball Valve Red - 22Mm

Butterfly Handle Ball Valve Red - 22Mm

The 22mm Butterfly Handle Ball Valve (Red) (Product Code: 10726) is a compact isolation valve designed for use in heating and plumbing systems where space is at a premium. The "butterfly" (or "T") handle design allows for 1/4 turn operation in tight cupboards or behind appliances where a standard long lever handle would be obstructed.

The Red handle indicates that the valve is intended for use on hot water or heating flow lines, providing immediate visual identification for maintenance.

Key Technical Specifications

Size: 22mm Compression.

Handle Type: Red Butterfly (T-handle).

Operation: 1/4 Turn (90-degree) shut-off.

Material: Nickel or Chrome-plated Brass body.

Bore: Full Bore design for maximum flow and minimum pressure drop.

Compatibility: Suitable for use with 22mm copper pipe.

Benefits of the Butterfly Handle

Space Efficiency: Ideal for manifold assemblies, cylinder cupboards, or tight pipe runs where traditional levers may hit the wall or other pipes.

Clear Identification: Red handle for hot lines (paired with the Blue 22mm version for cold lines).

Reliability: Ball valves are significantly less likely to seize compared to gate valves, ensuring they work when you need them most.

Installation Best Practices

Preparation: Ensure the 22mm copper pipe is cut square and deburred.

Compression Joint: Slide the nut and olive onto the pipe. Insert the pipe fully into the valve body and tighten the nut by hand.

Tightening: Use a wrench to tighten the nut approximately 3/4 to 1 full turn beyond hand-tight. Avoid over-tightening as it can crush the olive and cause a leak.

Orientation: The "T" handle should be parallel to the pipe when the valve is open and perpendicular when closed.