Flare Elbow 10Mm X 1/4 Bsp

Flare Elbow 10Mm X 1/4 Bsp

The Flare Elbow 10mm x 1/4" BSP (Product Code: S-260208) is a precision-machined brass right-angle fitting used primarily in oil heating systems. It allows for a secure, leak-free connection between 10mm copper oil pipework and any component with a 1/4" BSP female threaded port, such as oil pumps, burner inlets, or filter housings.

Because this is a flared fitting, it provides a mechanical seal that is highly resistant to the vibrations common in oil burner operations, making it a safer and more reliable choice than standard compression fittings for fuel lines.

Key Technical Specifications

Part Number: S-260208

Size: 10mm Flare x 1/4" BSP Male thread.

Angle: 90-degree elbow (ideal for tight spaces behind burners).

Material: Solid Brass for corrosion resistance and durability.

Compatibility: Suitable for Kerosene, Gas Oil, and Diesel systems.

Standards: Compliant with standards often specified in the OFTEC oil firing equipment directives.

Why use a Flare Elbow?

Vibration Resistance: Unlike compression "olives," a flared joint is physically shaped to lock into the fitting, ensuring it won't shake loose due to burner vibration.

Compact Design: The 90-degree bend allows you to route pipework neatly around the side of a boiler or within the limited space of a burner shroud.

Serviceable: Flared joints can be disconnected and reconnected during routine maintenance (like pump replacements) without needing to cut the pipe or replace an olive.

Installation Best Practices

Preparation: Slide your 10mm Flare Nut onto the 10mm copper pipe before flaring the end.

Flaring: Use a professional flaring tool to create a clean, uniform "cone" on the pipe end. Ensure there are no burrs or cracks on the flare.

The Thread: The 1/4" BSP male side of the elbow should be fitted into the component (like an oil pump). Use a suitable oil-resistant thread sealant or a copper washer if required by the component manufacturer.

Final Connection: Align the flared pipe end with the conical face of the elbow and tighten the flare nut. Do not over-tighten, as this can thin the copper flare and cause it to fail under pressure.

Essential Companion Products

The Fitting: Flare Elbow 10mm x 1/4" BSP

The Nut: 10mm Flare Nut (Essential for securing the pipe to the elbow).

Alternative Adaptor: 10mm x 1/4" BSP Flare Adaptor (Straight version).

De-aerator: Original Tiger Loop Bio Internal TL7000 (Commonly connected using these 1/4" flare fittings).

Specialist Support and Local Collection

We stock a comprehensive range of flare fittings for oil engineers at our trade counter: 61 Fullers Road, E18 2QB.