Pipe
Ufh 150m X 16mm Pert-Al-Pert Coil
Code:13049
SKU:13049
Overview
Ufh 150m X 16mm Pert-Al-Pert Coil
The 150m x 16mm PERT-AL-PERT Coil is a premium multilayer composite pipe designed for medium-to-large underfloor heating zones. This specific length is highly popular as it comfortably covers a large open-plan area or two smaller rooms while minimizing the waste often left over from shorter 100m coils.
The Al-Pert construction features an internal aluminum layer that provides a 100% oxygen barrier and ensures the pipe holds its shape once bent, making it significantly easier to install than standard PEX.
Key Technical Specifications
Dimensions: 16mm Outside Diameter (OD) x 2.0mm Wall Thickness.
Length: 150-meter coil.
Construction: 5-layer composite (PERT-Adhesive-Aluminum-Adhesive-PERT).
Oxygen Barrier: 100% permanent barrier provided by the internal aluminum core.
Form-Stable: Stays in place when bent; no "spring-back" into the installer's face.
Compatibility: Designed for use with standard 3/4" EK 16mm Eurocone Adaptors.
Coverage Guide (Approximate)
A 150m coil provides generous coverage depending on your pipe spacing:
200mm Centers (Standard): Covers approximately 30m².
150mm Centers (High Heat Loss): Covers approximately 22m².
Note: Always account for the "tails" running from the floor area back to the manifold location.
Installation Best Practices
Calibration: Because of the aluminum layer, you must use a 16mm Calibration Tool after cutting. This re-rounds the pipe and chamfers the internal edge to protect the O-rings in your fittings.
Loop Length: While this is a 150m coil, it is generally recommended to split it into two loops (e.g., 75m each) on your 6-Port Manifold if the room is large. This prevents excessive pressure drop and ensures even heat.
Decoiler: A 150m coil is relatively heavy; using a pipe decoiler will prevent the pipe from twisting as it is unrolled.
Essential Companion Products
Connectors: Keyplumb 16mm Eurocone Adaptors
Fixings: 60mm UFH Clips - Box of 300
Circulation: Grundfos UPM3 Flex 25-70 130 Pump
Control: UFH Mixing Valve with Temp & Pressure Gauge
Specialist Support and Local Collection
We stock 150m coils for immediate collection at 61 Fullers Road, E18 2QB. If you are unsure if one 150m coil is enough for your project, our team can calculate your total pipe requirement from your floor plans.
You may also be interested in...
-
Information
The 150m x 16mm PERT-AL-PERT Coil is a premium multilayer composite pipe designed for medium-to-large underfloor heating zones. This specific length is highly popular as it comfortably covers a large open-plan area or two smaller rooms while minimizing the waste often left over from shorter 100m coils.
The Al-Pert construction features an internal aluminum layer that provides a 100% oxygen barrier and ensures the pipe holds its shape once bent, making it significantly easier to install than standard PEX.
Key Technical Specifications
Dimensions: 16mm Outside Diameter (OD) x 2.0mm Wall Thickness.
Length: 150-meter coil.
Construction: 5-layer composite (PERT-Adhesive-Aluminum-Adhesive-PERT).
Oxygen Barrier: 100% permanent barrier provided by the internal aluminum core.
Form-Stable: Stays in place when bent; no "spring-back" into the installer's face.
Compatibility: Designed for use with standard 3/4" EK 16mm Eurocone Adaptors.
Coverage Guide (Approximate)
A 150m coil provides generous coverage depending on your pipe spacing:
200mm Centers (Standard): Covers approximately 30m².
150mm Centers (High Heat Loss): Covers approximately 22m².
Note: Always account for the "tails" running from the floor area back to the manifold location.
Installation Best Practices
Calibration: Because of the aluminum layer, you must use a 16mm Calibration Tool after cutting. This re-rounds the pipe and chamfers the internal edge to protect the O-rings in your fittings.
Loop Length: While this is a 150m coil, it is generally recommended to split it into two loops (e.g., 75m each) on your 6-Port Manifold if the room is large. This prevents excessive pressure drop and ensures even heat.
Decoiler: A 150m coil is relatively heavy; using a pipe decoiler will prevent the pipe from twisting as it is unrolled.
Essential Companion Products
Connectors: Keyplumb 16mm Eurocone Adaptors
Fixings: 60mm UFH Clips - Box of 300
Circulation: Grundfos UPM3 Flex 25-70 130 Pump
Control: UFH Mixing Valve with Temp & Pressure Gauge
Specialist Support and Local Collection
We stock 150m coils for immediate collection at 61 Fullers Road, E18 2QB. If you are unsure if one 150m coil is enough for your project, our team can calculate your total pipe requirement from your floor plans.
Product Enquiry
Please provide your contact information below and we will get back to you as soon as possible.
Price match for Trade accounts
Click & Collect from Bridgwater or London
Next Working Day Delivery - UK wide distribution