Flexible Tap Connector - 15Mm X 3/4'' X 500Mm With Iso Valve

Flexible Tap Connector - 15Mm X 3/4'' X 500Mm With Iso Valve

The 15mm x 3/4" x 500mm Flexible Tap Connector is a high-specification plumbing tail designed for bath taps, high-flow kitchen mixers, and utility fixtures. This connector features an integrated isolation valve, allowing for localized water shut-off for maintenance or repairs without having to isolate the main water supply for the entire property.

Key Features and Specifications
Compliance: Fully WRAS Approved, certifying that all internal and external materials are safe for use with potable (drinking) water.

Material Construction:

Inner Core: High-grade, non-toxic EPDM rubber for long-term heat resistance and flexibility.

Outer Braid: Premium Grade 304 Stainless Steel, providing superior protection against high pressure, kinking, and mechanical damage.

Fittings: Features a 15mm brass compression nut and a 3/4" BSP female threaded nut.

Configuration:

End 1: 15mm Compression fitting with an integrated Isolation Valve (slotted screwdriver operation).

End 2: 3/4" BSP Female threaded nut.

Length: 500mm (0.5m).

System Suitability: Specifically designed for bath pillar taps, bath/shower mixers, and larger kitchen fixtures that require a 3/4" inlet.

The Installer's Advantage
The 500mm length combined with an integrated isolation valve provides a professional and efficient installation. The extra length allows for a smooth, natural loop under the bath or sink, reducing stress on the fittings and preventing kinks. By having the isolation valve built directly into the 15mm compression end, installers can reduce the total number of joints in the system, effectively lowering material costs and minimizing the risk of future leaks.

Essential Companion Products
To ensure a high-integrity, watertight installation, the following components are recommended:

Sealing Component: For a leak-free 3/4" connection, always use a new seal: 3/4" Flexi Hose Washer Rubber or the 3/4" Flexible Tap Connector Washer

Direct Alternative (No Valve): If you already have separate isolation valves installed, use: Flexible Tap Connector 15mm x 3/4" x 500mm

Primary Supply: For the copper pipework feeding the connector: Copper Tube 15mm x 0.7mm x 3m

Appliance Drainage: Often used in utility rooms alongside: 2.1m Grey Flexi Outlet Washing Machine Hose

Specialist Support and Local Collection
Need advice on bath tap flow rates or the best way to route flexible tails in restricted spaces? Our trade counter is fully stocked with a variety of lengths and valve configurations.

Visit our trade counter and Bathroom Showroom at 61 Fullers Road, E18 2QB for expert advice and quick access to parts.